null
14-inch Crystal Sphere Fountain flowing over a black steel bowl surrounded by polished black pebbles

Crystal Sphere Fountain Kit (14"Dia)

SKU:
ABCS14K
$4,799.99
(No reviews yet) Write a Review
  • Overall fountain height is 22.75"
  • Acrylic Sphere 14" Diameter with 4.5" Spillway Opening
  • Powder-Coated HRCS Steel Bowl 24" Diameter x 7.75" Deep
  • This kit comes complete, including lighting
• Sold as a kit only, acrylic spheres are not sold separately.
• See Our 24" Diameter Crystal Sphere Fountain Kit
Current Stock:
Description
 

Complete recirculating outdoor fountain system

14" Crystal Sphere Fountain Kit

Create a modern focal point with flowing water by day and color-changing illumination after dark. This coordinated kit pairs a clear acrylic sphere and powder-coated steel bowl with a concealed reservoir, matched pump, lighting, plumbing, and your choice of polished pebbles. No open pond is required.

22.75" Approximate overall height
14" Clear acrylic sphere diameter
24" Powder-coated steel bowl diameter
39.5" × 16" Overall buried-basin footprint
660 GPH Included Mag-Drive pump

A Distinctive Fountain from Daylight to Dark

The smaller Crystal Sphere model delivers the reflective look of the larger fountain in a more manageable landscape footprint.

Reflective Water Movement

Water fills the transparent sphere, rises through its 4.5-inch opening, travels across the curved surface, and returns through the bowl to the hidden reservoir.

Matched as a System

The reservoir, 660 GPH pump, lighting, plumbing, support parts, and finishing pebbles are selected to work with the fountain assembly.

Color-Changing Illumination

The included three-light IllumiGlow® system illuminates the water and clear sphere from below for a colorful evening display.

What Comes with the Fountain

The principal fountain and recirculating-system components are supplied together. Select either black or mixed polished pebbles when ordering.

Visible Fountain Assembly

  • 14" diameter clear acrylic sphere
  • 4.5" spillway opening
  • 13.75" diameter acrylic base plate
  • 12" diameter × 6.75" high acrylic cylinder support base with light stems
  • 24" diameter × 7.75" deep powder-coated HRCS steel bowl
  • Bowl leveling support ring

Recirculating Water System

  • 36" Achelous AquaBox® Basin Reservoir (#AB36AB)
  • Two-piece screened basin cover
  • PVC center support and pump-access covers
  • 660 GPH Medium Mag-Drive Pump (#PB2576)
  • Pump discharge assembly, 3-foot kink-free hose, and fountain plumbing
View the included 36" Achelous AquaBox®
Review the Medium Mag-Drive pump family

The pump page contains multiple sizes. The kit includes the 660 GPH PB2576 model.

Included

  • Sphere, base plate, support, bowl, and leveling ring
  • Reservoir, grate, pump, and internal plumbing
  • Color-changing lighting kit
  • 120 lb. of the polished-pebble color selected when ordering

Plan to Provide

  • Excavation and site-preparation tools
  • Sand or small gravel if needed to establish a level, compacted base
  • Clean fill water and nearby electrical service
  • Surrounding landscape materials shown in photography
  • Optional automatic fill kit or splash apron, if desired

Core Specifications

The primary dimensions and operating components are shown below. Open the additional technical details for more specific assembly and pump information.

Overall heightApprox. 22.75"
Sphere & spillway14" dia. / 4.5" opening
Steel bowl24" dia. × 7.75" deep
Basin footprint39.5" dia. × 16" high
Basin capacity60 gallons
Basin weightApprox. 45 lb.
Pump660 GPH PB2576
Lighting3-light color-changing LED kit
Pebble finish120 lb. / black or mixed
Additional Technical Details
Sphere capacityApproximately 6 gallons
Sphere dry weightApproximately 4.5 lb.
Acrylic base plate13.75" diameter
Acrylic support12" diameter × 6.75" high
Pump power43 watts / 0.73 amps
Maximum pump head8.82 ft.
Pump cord20 ft.
Pump outlet3/4"

Plan the Installation Before Delivery

This is a built-in landscape fountain with an underground reservoir. Review the installation manual before excavation and keep it available throughout assembly.

Choose the Site

Select a viewing location with access to clean water and electricity. Confirm the location of underground utilities before digging.

Prepare the Base

Excavate slightly wider and as deep as the basin. Remove roots and sharp rocks, then level and compact the bottom with sand or small gravel if needed.

Set the Basin

Position the basin approximately one inch below grade, orient the pump opening toward the electrical source, and support the entire basin bottom.

Assemble & Level

Install the pump, plumbing, screened grates, support ring, bowl, lighting, support cylinder, and sphere in the sequence shown in the manual.

Fill & Test

Level the bowl and sphere before starting the pump. Allow 10–15 minutes for the sphere to fill and begin overflowing.

Operation, Cleaning & Seasonal Care

Keep the Water Clear

Floating debris can be visible inside the transparent sphere. Inspect the reservoir, pump pre-filter, and water condition regularly.

Protect the Acrylic

Clean with plenty of water and an acrylic-safe pad. For deeper cleaning, use mild soapy water and a clean cloth, then rinse thoroughly. Do not use chlorine or chloride-based treatments.

Prepare for Freezing Weather

Unplug and drain the exposed fountain, empty the sphere, and remove or protect the lighting and support parts as directed. Leave water in the buried basin during winter to help prevent frost heave.

Product Resources

Review the model-specific manual before excavation and retain both documents for installation, maintenance, winterization, and warranty reference.

14" Crystal Sphere Installation Manual (PDF) Blue Thumb Limited Warranty (PDF)

Crystal Sphere Installation Overview

Model note: This official Blue Thumb video demonstrates the larger 24-inch Crystal Sphere Fountain. The general assembly concept is useful, but the sphere, bowl, reservoir, pump, and installation dimensions differ. Use the 14-inch manual above for this kit’s exact setup.

“How to Install Your Crystal Sphere Fountain” — video courtesy of Blue Thumb. The video shows the larger 24-inch model.

Questions Before Ordering?

Blue Thumb’s Sales/Tech Team can help you confirm the installation footprint, included components, pebble selection, optional accessories, and other planning details.

Call 888-619-3474 Email the Sales/Tech Team

Frequently Asked Questions

Does this come as a complete fountain kit?

Yes. It includes the acrylic sphere and support components, steel bowl, concealed reservoir, 660 GPH pump, color-changing lighting, internal plumbing, and 120 pounds of your selected polished pebbles. Excavation tools, base-preparation material, clean water, electrical service, and surrounding landscaping are not included.

Does the Crystal Sphere Fountain require a pond?

No. Water recirculates between the fountain and its hidden 60-gallon reservoir, so an open pond is not required.

Does it require a permanent water connection?

No permanent connection is required for normal recirculation. You will need clean water for the initial fill and periodic top-offs. An automatic fill kit is optional and sold separately.

How much installation space should I allow?

The visible steel bowl is 24 inches in diameter. The buried basin reaches 39.5 inches in diameter and is 16 inches high. Allow extra working space for excavation, backfilling, electrical access, and future pump maintenance.

Can I choose the polished-pebble color?

Yes. Choose black or mixed polished pebbles through the product option selector. The kit includes 120 pounds of the selected option.

How long does the fountain take to fill and drain?

Allow approximately 10–15 minutes for the sphere to fill and begin overflowing. After the pump is switched off, allow approximately 5–10 minutes for the fountain to drain.

Can I buy the 14-inch acrylic sphere separately?

No. Blue Thumb lists the acrylic sphere as part of the complete Crystal Sphere Fountain Kit only.

How should I clean the clear acrylic sphere?

Use plenty of water and an acrylic-safe cleaning pad. For deeper cleaning, use mild soapy water with a clean cloth or towel, then rinse thoroughly. Chlorine and chloride-based treatments are not recommended.

How is the fountain winterized?

Unplug the fountain, allow it to drain, disconnect and empty the sphere, and remove or protect the lighting and support components as directed in the manual. Blue Thumb instructs owners to leave water in the buried basin during winter to help prevent frost heave, then clean and refill the system in spring.