Airmax PondSeries | Complete Two-Diffuser Package
Give your pond dependable bottom-up circulation with the Airmax PondSeries PS20. Built for ponds up to 2 acres, this system uses a 1/2 HP rocking-piston compressor and two weighted ProAir 4 diffusers to move water through the pond's depths, support dissolved oxygen levels, and help reduce stagnant conditions. This package includes 200 feet of 3/8" self-weighted airline for the two diffuser runs.
Fine bubbles rise from two diffuser locations, helping circulate deeper water and support more consistent oxygen distribution throughout the pond.
A dual-outlet airflow manifold lets you balance air delivery between the diffuser locations to accommodate different depths and line lengths.
The ventilated composite cabinet protects the compressor, while the cooling fan, filters, pressure gauge, and SmartStart technology support reliable operation and routine servicing.
Pond size alone does not determine the right aeration system. Depth, shape, diffuser placement, and airline length all affect circulation. The PS20's two diffusers are suited to ponds that benefit from aeration in two locations. Shallow or irregularly shaped ponds may require additional diffusers or a different system.
Maximum system depth: Airmax rates the PS20 for pond depths up to 50 feet. However, its PondSeries installation manual requires a Deep Water Kit, sold separately, for diffuser placement deeper than 21 feet.
Included airline: The 200 feet is the total supplied for both diffuser runs, not 200 feet per diffuser. Measure the actual routing distance from the compressor or shoreline connection to each diffuser before ordering.
For longer airline runs, alternate routing, or unusual pond shapes, contact our Sales/Tech Team so we can help you select the appropriate equipment.
Continuous-duty compressor with SmartStart technology, vibration-reducing mounts, air filtration, pressure gauge, relief valve, and airflow manifold for two diffuser outlets.
Outdoor composite enclosure with removable top, cooling fan, ventilated intake filtration, elevated base, and pre-wired electrical components. Cabinet dimensions: 23"L x 17"W x 15"H.
Each plate measures 19"L x 19"W x 5"H and incorporates four 6" PTFE non-stick membrane diffuser sticks and a check valve. The weighted design helps keep the plate positioned underwater.
Airmax EasySet-style weighted airline is intended to rest along the pond bottom between the shoreline connection and the diffusers. It does not require separate weights along its underwater run.
Operating-cost reference: Airmax estimates approximately $33.00 per month for continuous 24/7 operation at an electricity rate of $0.10 per kWh. Actual utility costs depend on your electricity rate and operating conditions.
Installation note: The 115V specification refers to this exact package. Other PS20 voltage configurations are separate manufacturer items.
Choose the number of diffusers based on your pond's surface area, depth, and layout. The figures below are maximum manufacturer ratings for each system family; effective coverage depends on site conditions.
| System | Max. Pond Size | Diffusers | Compressor | Max. Airflow |
|---|---|---|---|---|
| PS10 | 1 acre | 1 | 1/4 HP | 2.3 CFM |
| PS20 — This Model | 2 acres | 2 | 1/2 HP | 4.7 CFM |
| PS40 | 4 acres | Up to 4 | 3/4 HP | 5.6 CFM |
| PS60 | 6 acres | Up to 6 | 1 HP | 7.1 CFM |
Maximum coverage: 1 acre
Diffusers: 1
Compressor: 1/4 HP
Maximum airflow: 2.3 CFM
Maximum coverage: 2 acres
Diffusers: 2
Compressor: 1/2 HP
Maximum airflow: 4.7 CFM
Maximum coverage: 4 acres
Diffusers: Up to 4
Compressor: 3/4 HP
Maximum airflow: 5.6 CFM
Maximum coverage: 6 acres
Diffusers: Up to 6
Compressor: 1 HP
Maximum airflow: 7.1 CFM
Explore the PS10 single-diffuser system, PS40 three- or four-diffuser systems, and PS60 five- or six-diffuser systems.
Choose a stable, ventilated location for the cabinet above the pond's high-water mark. Provide access to a properly grounded, GFCI-protected electrical outlet.
Run the weighted airline underwater toward the two diffuser locations. Use properly sized direct-burial airline for any required underground run on land.
Assemble and connect the two ProAir 4 plates according to the manual. Place them in the planned locations and balance airflow with the cabinet manifold.
Follow Airmax's seven-day initial startup procedure. Do not immediately begin continuous operation in a stagnant pond that has not been aerated recently.
Starting bottom aeration too quickly can bring low-oxygen water and trapped gases toward the surface. Airmax specifies a gradual schedule when starting a new system or restarting after an extended shutdown: 30 minutes on day 1, then 1, 2, 4, 8, and 16 hours on days 2 through 6, followed by continuous operation beginning on day 7. Follow the official manual for complete procedures and precautions.
Airmax systems are designed for continuous operation with periodic maintenance. Keeping the cabinet ventilated and monitoring normal compressor pressure helps maintain dependable airflow.
Planning longer runs or maintaining an existing system? The following equipment pages can help you identify compatible airline and diffuser components.
Airline extensions and fitting requirements depend on the planned route. Check the manufacturer instructions before changing airline diameter or extending a system.
Airmax's current published aeration warranty distinguishes coverage by component:
Manufacturer warranty terms and exclusions apply. Wear components are not included in the standard aeration warranty.
Use the current manufacturer warranty information shown above where older manual revisions differ.
This official Airmax video introduces general aeration-system installation. It covers the product family rather than this exact PS20 package, so follow the current PS20 manual for component-specific procedures and requirements.
Video: Airmax Aeration System Installation | Official Airmax YouTube channel
Not sure whether two diffuser locations or 200 feet of airline will cover your pond? Our Sales/Tech Team can help you evaluate pond depth, layout, airline routing, and compatible equipment before you order.
It may, but pond shape affects diffuser placement. Narrow sections, coves, and isolated areas can require additional circulation points. We recommend reviewing the pond layout before relying on maximum acreage ratings.
Yes. A remote cabinet installation can use appropriately sized direct-burial airline between the cabinet and shoreline. Direct-burial tubing and any additional fittings needed for that arrangement are sold separately.
The manufacturer rates the PS20 for a maximum depth of 50 feet, but its installation manual requires a separately purchased Deep Water Kit for operation deeper than 21 feet. Consult us about the complete deep-water configuration before ordering.
Aeration supports water circulation, dissolved oxygen, and the biological processes involved in pond management. It can help reduce stagnant conditions and support muck reduction, but results depend on pond conditions and aeration is not a guaranteed standalone solution for every algae or muck problem.
Yes. The compressor is designed for continuous duty. After completing the manufacturer's gradual startup schedule, 24/7 summer operation is recommended. Winter operation requires additional safety precautions due to thin ice and open-water hazards.
Record the pressure-gauge reading after installation and monitor it during routine service. Airmax identifies approximately 5–10 PSI as a normal operating range, although the baseline varies with installation. A significant pressure change, reduced bubbles, overheating, or unusual noise indicates that inspection may be needed. Disconnect power before service.