null

5 - 6 Skid Airmax Pond Aeration System - PS60

SKU:
PS60grp
$5,924.99 - $6,209.99
(No reviews yet) Write a Review
  • Configurations: 5 or 6 ProAir 4 weighted diffusers
  • Maximum coverage: Up to 5 or 6 acres, depending on pond depth and selected configuration
  • Maximum depth: 50 ft.
  • Compressor: 1 HP SilentAir, 115V, 7.1 CFM maximum
  • Airline: Not included; 5/8" tubing sold separately
  • Airmax limited warranty: 10 years on cabinet; 5 years on diffusers and separately purchased Airmax airline; 3 years on compressor and electrical components

Made in USA | ETL Listed

View Airmax Owner's Manual and Warranty Terms (PDF)

Current Stock:
Airmax PondSeries | Large Pond Aeration

Airmax PS60 Aeration System — Powerful Bottom-Up Aeration for Large Ponds

Bring consistent water circulation and aeration to larger ponds and lakes with the Airmax PondSeries PS60. Built around a 1 HP SilentAir rocking piston compressor, this system uses five or six ProAir 4 weighted diffuser plates to circulate water from the pond bottom upward. Choose the configuration that fits your pond's acreage, depth, and shape.

With a weather-resistant composite cabinet, integrated SmartStart technology, and adjustable airflow, the PS60 is designed for demanding residential, commercial, and property-management applications.

5–6 Acres Maximum coverage by configuration
50 ft. Maximum diffuser depth
1 HP SilentAir compressor
7.1 CFM Maximum airflow

Choose the Right PS60 System for Your Pond

The PS60 comes in two diffuser configurations. The six-diffuser model increases the area that can be served and gives you another diffuser placement point for larger or irregularly shaped ponds. Actual coverage depends on water depth and pond geometry.

Pond Depth / Specification 5-Diffuser PS60 6-Diffuser PS60
6–9 ft. deep Up to 2.5 acres Up to 3 acres
9–12 ft. deep Up to 3.5 acres Up to 4 acres
12–50 ft. deep Up to 5 acres Up to 6 acres
Included diffuser plates 5 ProAir 4 6 ProAir 4
Manufacturer item number 600869 600873
Blue Thumb item number A600869 A600873
Weighted airline Sold separately Sold separately

PS60 — 5 Diffusers

6–9 ft. deep: Up to 2.5 acres

9–12 ft. deep: Up to 3.5 acres

12–50 ft. deep: Up to 5 acres

Diffuser plates: 5 ProAir 4

Manufacturer item: 600869

Blue Thumb item: A600869

Airline: Sold separately

PS60 — 6 Diffusers

6–9 ft. deep: Up to 3 acres

9–12 ft. deep: Up to 4 acres

12–50 ft. deep: Up to 6 acres

Diffuser plates: 6 ProAir 4

Manufacturer item: 600873

Blue Thumb item: A600873

Airline: Sold separately

Not Sure Which Configuration You Need?

Start with your pond's surface acreage, depth, shape, and the locations where water circulation is needed. A narrow cove, irregular shoreline, or separated basin may require more precise diffuser placement than an open, regularly shaped pond. Our Sales/Tech Team can help review your layout before you order.

What Is Included With Your PS60?

SilentAir Compressor & Controls

  • 1 HP SilentAir rocking piston compressor with Integrated SmartStart Technology (IST)
  • Airflow manifold with individual adjustments
  • Pressure gauge and pressure relief valve
  • Compressor air filter, vibration-reducing mounts, and quick-connect fittings

Large Airmax Composite Cabinet

  • Weather-resistant composite enclosure with removable top
  • Built-in cooling fan and high-density intake pre-filter
  • Elevated base and pre-wired electrical equipment
  • Cabinet dimensions: 27" L × 24" W × 18.75" H

ProAir 4 Weighted Diffuser Plates

  • Five or six weighted diffuser assemblies, depending on selection
  • Each uses four 6" PTFE non-stick membrane sticks
  • Built-in check valve and weighted sled design
  • Individual diffuser dimensions: 19" L × 19" W × 5" H

Airline & Installation Supplies

Airline is not included in either PS60 configuration. You'll need to choose the length and type of tubing for your site. Connectors, trenching materials, electrical work, and optional installation accessories may also be needed.

For standard PS60 installations, we recommend appropriately sized 5/8" airline. Review the connection plan in the manufacturer's installation manual.

Plan Your Airline Before Ordering

The PS60 is sold without the long airline runs needed to connect the system to the diffuser locations. Plan each run based on where the cabinet will sit and how far each diffuser must travel into the water.

Underwater Airline

5/8" EasySet Self-Weighted Tubing is designed to rest on the pond bottom without additional weights. Use it from the shoreline to each diffuser.

Shop 5/8" EasySet Self-Weighted Tubing — 100' Roll

Underground Airline

5/8" Airmax Direct Burial Tubing is used to carry air from a cabinet located away from the pond to the shoreline, where it connects to the weighted underwater airline.

Shop Airmax 5/8" Direct Burial Tubing — 100' Roll

Additional fittings may be required for connections between sections. A compatible optional remote-manifold installation uses a different supply-line arrangement; follow the Airmax instructions for that setup. Do not substitute 3/8" airline for the standard PS60 runs without manufacturer approval.

Complete PS60 Technical Specifications

Product series: Airmax PondSeries PS60
Listing SKU: PS60grp
Compressor: 1 HP SilentAir rocking piston
Voltage: 115V for listed configurations
Running amps: 6.3A at 115V
Maximum airflow: 7.1 CFM
Maximum coverage: 5 or 6 acres, depending on diffuser count and water depth
Maximum depth: 50 ft.
Diffusers: 5 or 6 ProAir 4 weighted plates
Diffuser dimensions: 19" L × 19" W × 5" H, each
Cabinet dimensions: 27" L × 24" W × 18.75" H
Power cord: 6 ft.
Standard airline: 5/8", sold separately
Operation: Continuous duty; designed for 24/7 use
Electrical certification: ETL Listed
Country of origin: Made in USA

Airmax's published operating-cost estimate is $51.90 per month for continuous operation at an assumed electricity rate of $0.10/kWh. This is a manufacturer benchmark, not a guaranteed utility cost; actual costs depend on your electrical rate and operating conditions. Airmax also offers separately identified 230V PS60 models, but the two configurations represented on this listing are 115V.

Installation: What to Expect

Installing a multi-diffuser PS60 involves site preparation, airline routing, diffuser placement, and airflow adjustment. The following overview is for planning; follow the complete Airmax owner's manual for installation and startup.

Choose the Cabinet Location

Place the cabinet on a stable, level surface above the pond's high-water mark and away from irrigation spray. Maintain unobstructed cooling airflow and provide a properly grounded, GFCI-protected power source.

Prepare the Base & Airline Routes

Prepare a drained stone or gravel base. Route the selected airline to the shoreline, using direct-burial tubing where appropriate. Follow the manual's trenching and connector requirements.

Place the Weighted Diffusers

Assemble and connect the ProAir 4 diffuser plates. Distribute them in the planned locations and lower them carefully to the pond bottom, keeping the assemblies upright. Large ponds commonly require boat or raft access.

Balance Airflow & Start Gradually

Adjust the individual airflow valves so each diffuser produces the intended circulation. Record the normal pressure-gauge reading and follow Airmax's gradual initial-startup schedule before beginning continuous operation.

Important: Don't Begin With Continuous Operation

In an established pond, suddenly circulating oxygen-poor bottom water can harm fish. Airmax requires gradual startup when installing the system or restarting after an extended shutdown:

  • Day 1: Run 30 minutes.
  • Day 2: Run 1 hour.
  • Day 3: Run 2 hours.
  • Day 4: Run 4 hours.
  • Day 5: Run 8 hours.
  • Day 6: Run 16 hours.
  • Day 7: Begin continuous operation.

Turn the system off for the remainder of each day during the gradual-startup period. Consult the owner's manual for the complete safety procedure.

Maintenance & Seasonal Operation

The PS60 is designed for long-term operation with periodic maintenance. Keep the cabinet's ventilation openings clear and disconnect electrical power before servicing.

  • Every 3–6 months: Inspect and clean or replace the air filter; check the cooling fan, pressure gauge, and relief valve.
  • Every 12–18 months: Airmax recommends installing the appropriate compressor maintenance kit.
  • Every 24–36 months: Inspect and clean the diffuser membrane sticks as needed, or sooner if bubbles decrease or pressure rises.
  • Winter operation: The system can operate in cold conditions, but open water and dangerously thin ice can form around the diffusers. Post appropriate warnings and follow Airmax's winter operating guidance.
  • If shutting down for winter: Follow the PS60-specific procedure for disconnecting and storing the compressor in a dry location.

Environmental conditions can require more frequent maintenance. Airmax provides detailed maintenance, troubleshooting, and winterization procedures in the owner's manual.

Airmax Manufacturer Warranty

The PS60 has separate limited warranty coverage for its major components:

  • Composite cabinet: 10 years
  • ProAir diffusers: 5 years
  • Airline: 5 years, when separately purchased and covered under Airmax terms
  • Compressor and electrical components: 3 years

Manufacturer terms, exclusions, and registration requirements apply. Normal wear parts, including diffuser membranes and certain compressor service parts, are excluded from coverage.

Official Product Resources

Use these Airmax resources to review detailed installation procedures, service information, and specifications.

Airmax Installation Video

Watch this manufacturer installation demonstration for an overview of the Airmax aeration setup process. This video provides general installation guidance for Airmax aeration systems; refer to the current PS60 owner's manual for exact component details, airline requirements, and startup procedures.

Airmax Aeration System Installation

Follow along with a general Airmax aeration installation demonstration covering the installation process and important setup considerations.

Official Airmax video. General aeration-system guidance; exact PS60 configuration details may differ.

Need Help Sizing Your Pond Aeration System?

Large ponds don't always have straightforward aeration requirements. Our Sales/Tech Team can help you review pond dimensions, depth, diffuser quantity, airline requirements, and installation planning before you order.

Frequently Asked Questions
Can I use the PS60 in a pond shallower than 6 feet?

The PS60's published coverage recommendations begin at 6 feet of water depth. Shallower ponds can have different circulation requirements. Contact our Sales/Tech Team to review a shallow-water system or an appropriately engineered aeration layout rather than assuming the PS60 is the best fit.

How much airline do I need to purchase?

Measure from the cabinet to the shoreline and from the shoreline to each diffuser location, allowing for the full installed route. A conventional configuration requires separate airline runs to each diffuser; an optional remote manifold changes that layout. Because every pond is different, there is no universal tubing quantity included with the PS60.

Does the PS60 work in irregularly shaped ponds?

Yes. Multiple diffusers allow circulation points to be distributed through different areas of the pond. However, coves, depth changes, and obstructions can affect coverage. A larger or unusually shaped pond may need a customized layout or multiple systems.

Is the PS60 designed to run all day?

Yes. The SilentAir compressor is designed for continuous operation. Once the required gradual-startup period has been completed, Airmax recommends continuous summer operation for optimal aeration benefits.

Can I leave the aeration system running during winter?

The system can operate in winter when properly managed. However, aeration can create open water and dangerously thin ice. Follow the manufacturer's winter recommendations and keep people and animals away from unsafe ice. If you shut down, follow the PS60-specific winterization procedure.

What happens if the bubbles decrease at one diffuser?

Uneven or reduced bubbling may indicate an airline obstruction, airflow adjustment issue, dirty membranes, or a maintenance need. Compare the pressure gauge to its normal marked reading and consult the troubleshooting guide. Disconnect power before servicing equipment.

Is there a 230V version of the PS60?

Airmax manufactures 230V PS60 configurations, but this Blue Thumb listing identifies the 115V five- and six-diffuser packages. Contact our Sales/Tech Team before ordering if your installation requires 230V equipment.