Helps Stabilize the Column
The 19-by-24-inch plate helps keep a compatible tall real-stone fountain level and standing on the supporting basin cover or grate.
Tall Basalt Support Plate
$349.99
-
When ordering for our Tall Basalt Column Fountain Rock:
- This Support Stand requires our core-drilled basalt columns to be drilled to a larger diameter.
- When ordered with basalt columns, we will drill the columns to meet product specs prior to shipment.
- If stands are purchased at a separate time, the columns will need to be drilled by the customer.
Support for compatible tall real-stone fountains
Tall Basalt Support Plate
This purpose-built support assembly helps compatible tall basalt fountain columns remain level and upright while allowing the water-feed hose to pass through the welded stand pipe. It is a support component for a custom fountain system—not a complete fountain kit.
Plate footprint: 19" W × 24" L
Stand-pipe height: 12"
Stand-pipe O.D.: 1-1/2"
Feed-hose fit: 1" hose
Built for a Better-Planned Tall Column Installation
The support plate combines a broad base with a welded vertical stand pipe, giving the column a defined support position while preserving a path for the fountain's water line.
Routes the Water Line
A 1-inch water-feed hose fits through the 12-inch-tall stand pipe, keeping the support and water path centered within the column.
Prepared to Match
When you order the plate with a compatible core-drilled basalt column, we drill the column to the required larger diameter before shipment.
What You Are Buying
This listing is for the support plate assembly only. A complete operating fountain requires a compatible column and a properly sized recirculating system.
Included
- One center-drilled 19" W × 24" L support plate
- One welded 12" H stand pipe with 1-1/2" outside diameter
Not Included
- Basalt fountain column
- Basin or reservoir, structural grate or cover, and center support
- Pump, valves, tubing, fittings, lighting, or electrical service
- Fasteners, decorative stone, and surrounding landscape materials
Specifications
SKU: ABBCTSP
Product type: Tall basalt fountain-column support plate
Plate dimensions: 19" W × 24" L
Stand-pipe height: 12"
Stand-pipe outside diameter: 1-1/2"
Compatible hose size: 1" water-feed hose fits through stand pipe
Column compatibility: Most taller Blue Thumb real-stone basalt fountains; confirm the exact column before ordering
Column preparation: Requires a larger core-drilled opening sized for the stand
Plan the Support Plate into the Fountain System
Tall real-stone columns are heavy. The plate is only one part of the installation; the basin, cover or grate, underlying supports, pump, and plumbing must all be selected and laid out for the exact project.
Confirm the Column
Verify that the plate is appropriate for the exact basalt column. Order both together so we can complete the required drilling before shipment.
Allow for the Footprint
Reserve a clear 19-by-24-inch area on the structural cover or grate and keep pump access, basin supports, and neighboring fountain positions in mind.
Set, Level & Test
Route the hose without kinks, slide the prepared column over the stand, set the assembly upright, and verify level and water flow before adding the finish stone.
Fastening note: The related tall triple fountain manual says the stand plate may be screwed to the basin cover for added security. Screws are not included. Your basin cover, grate, and support arrangement must be appropriate for the load and installation method.
Product Resource
This manual covers Blue Thumb tall triple real-stone fountain systems that use support stands. Use it for system-planning context; your custom layout and selected components may differ.
Questions About Compatibility?
Before purchasing for an existing column—or planning a custom single-, double-, or triple-column fountain—contact our Sales/Tech Team. We can help you confirm the column preparation and the surrounding basin, grate, pump, and plumbing requirements.
Frequently Asked Questions
Is this a complete basalt fountain kit?
No. This listing is for one support plate assembly only. The basalt column, basin or reservoir, structural cover or grate, pump, plumbing, lighting, and finishing materials are not included.
Which fountain columns fit this support plate?
It is used with most of our taller real-stone basalt fountains, but compatibility should be confirmed for the exact column. The column must have the larger core-drilled opening required by the stand.
Can I add the plate to a basalt column I already own?
Possibly, but the existing column will need to be drilled to the required larger diameter. If the plate and column are not ordered together, the customer is responsible for arranging that drilling. Contact us before ordering so we can review the application.
Why should I order the support plate with the column?
Ordering them together lets us drill the compatible core-drilled basalt column to fit the stand before shipment, reducing jobsite modifications and compatibility problems.
What are the support plate dimensions?
The plate measures 19 inches wide by 24 inches long. Its welded stand pipe is 12 inches high with a 1-1/2-inch outside diameter.
What size water line fits through the stand pipe?
A 1-inch water-feed hose fits through the stand pipe. Pump sizing, valves, hose length, and the rest of the plumbing depend on the height and number of columns in the fountain system.
Are mounting screws included?
No. The related tall triple fountain manual says the plate may be screwed to the basin cover for added security, but screws are not included.
How much space should I reserve on the basin cover?
Plan around the full 19-by-24-inch plate footprint. The final position also needs to avoid interfering with the pump access, basin supports, plumbing, and other fountain columns.
Related Products
-
Tall Rustic Basalt Fountains
$349.99 - $1,699.99 -
Basalt Bench - 72"
$1,299.99 -
Basalt Bench - 48"
$999.99 -
Kazan Basalt Fountain Kit
$1,599.99
