Fountain & Pond Replacement 2-pin Warm White LED Light
$49.99
(No reviews yet)
Write a Review
Write a Review
Fountain & Pond Replacement 2-pin Warm White LED Light
• One (1) - 1.8 watt LED light with a 16 ft. 2-pin power cord
• Submersible 3000K warm white light
• Can be used in or out of water in fountains or ponds
• This is a light only; the transformer is not included
Blue Thumb IllumiGlow® Replacement Lighting
Fountain & Pond Replacement 2-Pin Warm White LED Light
Restore the warm, inviting glow of your fountain, pond, or waterfall with this compact IllumiGlow® replacement LED spotlight. Designed as a direct replacement for a light in the Blue Thumb PB2897 Warm White Fountain & Pond 3-Light Kit, it delivers focused 3000K illumination in a versatile, submersible fixture.
Replacement Lighting Made Simple
When one light in your existing IllumiGlow® warm white system needs replacement, you may not need an entirely new lighting kit. This individual LED fixture allows you to replace a compatible light while keeping the rest of your existing system in service.
Its compact bullet-style design makes it useful for highlighting fountain surfaces, moving water, waterfall cascades, and decorative pond features. Install it in or out of water as appropriate for your existing setup.
Important Before Ordering: This product includes one replacement LED light with an attached 16-foot, 2-pin power cord. It does not include a transformer, splitter, or complete lighting kit. It is intended for compatible IllumiGlow® warm white lighting systems, particularly PB2897.
Quick Specifications
Power Consumption
1.8 Watts
Light Color
3000K
Warm white
Cord Length
16 Feet
Connector
2-Pin
Estimated LED Life
20,000 Hours
Installation
Submersible
In or out of water
Why Choose This Replacement Light?
Warm White Illumination
The 3000K color temperature provides a welcoming glow that complements stone, water movement, and decorative fountain features.
Compact Spotlight Design
The small bullet-style fixture is suited to tight spaces and targeted accent lighting around water features.
Wet or Dry Placement
Submersible construction allows use underwater or outside the water in a suitable fountain or landscape setting.
Low Energy Consumption
At just 1.8 watts, the LED provides accent illumination without the power demand of traditional higher-wattage lighting.
Flexible Cord Reach
The attached 16-foot cord offers placement flexibility within a compatible lighting installation.
Replace One Fixture
Restore an existing compatible lighting arrangement without automatically replacing the entire three-light kit.
Complete Product Specifications
| Product Name | Fountain & Pond Replacement 2-Pin Warm White LED Light |
|---|---|
| Blue Thumb SKU | PB2898 |
| Product Type | Individual replacement LED spotlight |
| Compatible Kit | IllumiGlow® Warm White Fountain & Pond 3-Light Kit (PB2897) |
| Light Output Color | Warm white |
| Color Temperature | 3000K |
| Power Consumption | 1.8 watts |
| Connector Type | 2-pin |
| Attached Cord | 16 feet |
| Water Use | Submersible; suitable for in-water or out-of-water placement |
| Estimated LED Life | 20,000 hours |
| Transformer Included | No |
| Quantity | One LED light |
What Is Included?
Included
One 1.8-watt warm white LED replacement spotlight with an attached 16-foot, 2-pin power cord.
Not Included
Transformer, power supply, photocell, splitter, and complete multi-light kit.
Before Purchasing
Confirm that your existing lighting system uses the compatible PB2897-style 2-pin warm white light.
Compatibility: Make Sure You Order the Right Light
This replacement fixture is specifically identified for use with the Blue Thumb IllumiGlow® Warm White Fountain & Pond 3-Light Kit, item PB2897.
2-Pin vs. 4-Pin: This is a warm white, 2-pin replacement light. It should not be assumed compatible with IllumiGlow® 4-pin RGB color-changing systems. Verify the connector, kit model, and power requirements before ordering.
If you are replacing a light from a different kit, compare your original fixture and connector with this replacement or contact Blue Thumb for assistance.
Replacing Your Existing LED Light
1
Disconnect Power
Unplug the lighting system from its electrical supply before handling or disconnecting any light.
2
Identify the Existing Fixture
Confirm the original light belongs to a compatible 2-pin IllumiGlow® warm white system. Inspect the connector and existing cord routing.
3
Disconnect the Old Light
Follow the kit instructions to disconnect the existing fixture. Avoid pulling on, cutting, or modifying the wiring.
4
Connect and Position the Replacement
Connect the new light to the compatible system, ensure the connection is properly secured according to the manufacturer's instructions, and position the spotlight toward your desired focal point.
5
Restore Power and Check Operation
After completing the installation, restore power and verify that the replacement light operates correctly.
Installation Reminder: Follow the manufacturer's instructions for electrical connections, connector placement, and safe outdoor installation. Never modify the wiring to make an incompatible component fit.
Related IllumiGlow® Lighting Products
Installation Instructions & Resources
Review the manufacturer's Fountain & Pond 3-Light Kit instructions for setup, safe operation, and maintenance guidance.
View Installation Instructions (PDF)Frequently Asked Questions
Is this a complete lighting kit?
No. This product includes one replacement LED light with a 16-foot cord. A transformer and other lighting system components are not included.
Which Blue Thumb lighting kit does this replace a light in?
This is the PB2898 replacement light for the IllumiGlow® Warm White Fountain & Pond 3-Light Kit, PB2897.
Can this LED light be submerged?
Yes. The fixture is designed for submersible use and may also be used outside the water in suitable fountain or landscape applications.
What color is the light?
It produces 3000K warm white illumination. It is not an RGB color-changing light.
How long is the power cord?
Each replacement light includes an attached 16-foot cord with a 2-pin connection.
Can I use it with a 4-pin color-changing lighting system?
Do not assume compatibility. This replacement is intended for a compatible 2-pin warm white system, not a 4-pin RGB lighting system.
How long is the LED expected to last?
The manufacturer lists an estimated LED life of 20,000 hours. Actual service life can vary with operating conditions.
Does the replacement include a transformer?
No. You will need an existing compatible lighting power system. If you need a complete setup, review the PB2897 IllumiGlow® 3-Light Kit.
Where can I find warranty and installation information?
Review the linked PB2897 installation instructions and Blue Thumb's published warranty policy. Contact Blue Thumb to confirm coverage for an individually purchased PB2898 replacement light.
Questions Before Ordering?
Not sure whether this replacement light matches your existing IllumiGlow® system? Blue Thumb's team can help you identify the correct fixture, connector, or lighting kit before you purchase.
Have your existing kit model or original light information ready for a faster compatibility check.
Related Products
-
-
2 Light LED White Sets for EcoSeries Fountains
$699.99 - $874.99 -
-
4 Light LED White Sets for EcoSeries Fountains
$999.99 - $1,174.99
