PGQPP - Quick Prime Plus - Quart
- Use to prep areas where two pond liner sheets are joined together
EPDM Pond Liner and other surfaces to be primed must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.
Stir QuickPrime Plus throughly before and during use. QuickPrime Plus must be applied with a QuickScrubber or QuickScrubber Plus pad and handle using long back and forth strokes with moderate-to-heavy pressure along the length of the area until surfaces become gray in color with no streaking or puddling. Allow the QuickPrime Plus to flash off completely according to the touch-push test (usually less than 10 minutes, flash off time will vary depending on ambient air conditions) before apllying QuickSeam products or Lap Sealant.
QuickPrime Plus Coverage Rate below. Approximately 50- 100 square feet per gallon one side. Coverage rates for various are as follows:
3" QuickSeam Seam Tape: 100-150 linear feet/gallon
6" QuickSeam Cover Tape: 100-150 linear feet/gallon
This product requires Haz-Mat Shipping and cannot be shipped UPS Next-Day Air, Second-Day Air or Three-Day Select