C2 Kanji Fountain Kit - Granite Cube

A Complete Granite Cube Fountain Kit at a Scratch-and-Dent Price

The C2 Kanji Fountain Kit combines a polished 18-inch gray granite cube with a concealed recirculating reservoir. Water bubbles from the centered opening, spreads across the flat top and flows over the cube’s four sides for a clean, architectural display.

This complete outdoor fountain kit includes the basin, pump, plumbing, decorative pebbles and installation supplies needed to create a self-contained water feature without an exposed pond.

• Real gray granite: A substantial polished stone cube with natural grain and tonal variation.
• Geometric water flow: A centered plume sends water across the top and down the smooth sides.
• Concealed reservoir: Water returns through the decorative pebbles to the buried basin for recirculation.
• Complete matched kit: The basin, 660 gph pump, plumbing, tubing, pebbles and maintenance tablets are included.
• Choice of finishing stone: Select black or mixed polished pebbles when ordering.

Not Included

Excavation tools, heavy-lifting equipment, site preparation materials, electrical service and a water supply are not listed as included. Lighting and an automatic water-fill system are optional additions.

1. Plan the location. Allow space for the basin’s 39.5-inch overall diameter and possible overspray. Choose an area with accessible water and electrical service, and identify underground utilities before digging.
2. Prepare a stable base. Excavate slightly wider and as deep as the basin. Remove sharp rocks and roots, then level and compact the entire bottom so the basin is fully supported.
3. Install the system. Position the basin, pump, support, grates and tubing as directed in the installation manual. Center the cube carefully without kinking the tubing.
4. Fill and adjust. Fill the reservoir to the bottom of the grate, start the pump and use the included flow control to achieve the desired display while minimizing splash.

Plan for the weight: The granite cube weighs approximately 550 lb. Arrange appropriate lifting equipment, sufficient help and a clear path to the prepared installation area before moving it.

Electrical safety: The submersible pump must remain underwater while operating. Connect its three-prong plug to a GFCI-protected outlet in a dry location, and unplug it before servicing or removing it from the water.

Routine care: Check the reservoir regularly and replace water lost to evaporation and splash. Keep debris away from the pump intake, clean the pump as needed and follow the treatment directions for the included MuckBuster® Tablets. An optional Fountain Basin Auto Fill Kit can reduce manual refilling.

Freezing climates: Before prolonged freezing conditions, remove the pump and store it in water where it cannot freeze. Blue Thumb directs owners to leave water in the buried basin over winter and permits the real stone fountain to remain outdoors. Once thawed in spring, clean the basin, add fresh water and reconnect the pump.