Aquascape Small Pondless Waterfall Kit 6' Stream
- Waterfall Width: 22" Waterfall Spillway
- Stream Length: Designed for a 6' Waterfall or Stream
- Adjustable Pump: AquaSurge® 2000–4000 with Up to 3,947 GPH Maximum Rated Flow
- Smart Control: Adjust Water Flow & Schedule Operation Using the Aquascape Smart Control App
- Complete Pondless® Waterfall Kit: Includes Pump, Spillway, Pondless® Vault, 3 Small AquaBlox® Modules, Liner & Plumbing
- Automatic Water Treatment: Dosing System & Starter Treatment Included
- Low-Maintenance Design: Hidden Underground Reservoir – No Traditional Pond Required
- Decorative Rocks, Gravel & Lighting: Sold Separately
Compare Similar Waterfall Kits:
Blue Thumb Elite 16" Small Spillway Falls Kit (PB16KIT)
Small Pondless® Waterfall Kit – Complete 6' Stream System
Create the sights and sounds of a natural waterfall without building a traditional pond. The Aquascape Small Pondless® Waterfall Kit combines a 22-inch Waterfall Spillway, adjustable-flow AquaSurge® pump, underground water storage, liner, plumbing, and automatic water treatment equipment into one coordinated waterfall system.
Designed for a recirculating waterfall or stream approximately 6 feet long, this kit is a practical choice for homeowners and landscape professionals who want a compact water feature with convenient pump access and smartphone flow control.
A Waterfall Designed for Convenient Operation
Adjustable Waterfall Flow
The included AquaSurge® 2000-4000 pump allows you to adjust water flow to suit your waterfall design. Its Smart Control Receiver supports pump operation and scheduling through the Aquascape Smart Control App.
Automatic Water Treatment
An Aquascape automatic dosing system and starter treatment are included. The dosing equipment adds compatible water treatment according to its settings, reducing the need for routine manual dosing.
Hidden Reservoir, Accessible Pump
Water recirculates through an underground reservoir built with three Small AquaBlox® modules and a Pondless® Waterfall Vault. The vault provides access to the pump for inspection and maintenance.
Is This the Right Waterfall Kit for Your Landscape?
The Small Pondless® Waterfall Kit is designed for a shorter waterfall or stream, approximately 6 feet long, with a 22-inch-wide Waterfall Spillway at the upper end of the feature.
The included spillway distributes water across the waterfall entrance. Decorative stonework determines how that water cascades through the finished landscape.
This kit is well suited to garden beds, sloped landscape areas, outdoor seating spaces, and residential waterfall projects where a traditional pond is not desired.
Before You Order
The 6-foot stream dimension does not represent the complete excavation or finished landscape footprint.
Allow additional room for the underground reservoir, waterfall elevation, boulders, gravel, plumbing, and construction access. The final excavation must accommodate the three AquaBlox® modules and Pondless® Waterfall Vault.
Decorative rocks, gravel, plants, landscape finishing materials, excavation tools, and electrical installation are not included.
What's Included in the Aquascape Small Pondless® Kit?
Aquascape supplies the major components needed to build the recirculating waterfall system. The equipment is organized below by its function within the installation.
Waterfall & Liner
- Aquascape 22" Waterfall Spillway
- 8' × 10' stream liner
- 10' × 10' reservoir liner
- 45 mil EPDM rubber liner material
- 100 sq. ft. protective underlayment
- Pond and Waterfall Foam Sealant
Pump & Water Storage
- AquaSurge® 2000-4000 Adjustable Flow Pond Pump
- Smart Control Receiver supplied with the pump
- Pump check valve assembly
- Pondless® Waterfall Vault
- Three Small AquaBlox® Water Storage Modules
Treatment & Installation
- Aquascape automatic dosing system
- 32 fl. oz. starter water treatment
- 1.5" × 25' Flexible PVC Pipe
- Silicone and PVC cement
- Installation components and supplies
- Aquascape Welcome Kit
Important: Rocks, Gravel & Lighting
Decorative boulders and gravel are not included. These materials are needed to create the finished waterfall, form the stream, and conceal the underground reservoir.
A decorative lighting package is not included in this model. Lighting can be planned separately if you want to illuminate the waterfall after dark.
The manufacturer's current kit specification includes an automatic dosing system with starter treatment. Additional compatible water treatments are available separately when the starter treatment is depleted.
Aquascape Small Pondless® Waterfall Kit Specifications
Pump flow is a maximum manufacturer rating, not the flow delivered at every installation. Actual waterfall flow depends on vertical lift, pipe length, fittings, and the selected pump setting.
Compare Aquascape and Blue Thumb Waterfall Kits
Both this Aquascape system and our Blue Thumb Elite 16" Small Spillway Falls Kit are designed for waterfalls or streams approximately 6 feet long.
The primary differences are the waterfall spillway width, pump and control equipment, underground reservoir design, included plumbing, and automatic water treatment.
| Feature | Aquascape Small Pondless® Kit |
Blue Thumb Elite 16" Spillway Kit |
|---|---|---|
| SKU | AI53038 | PB16KIT |
| Stream length | 6' | 6' |
| Stream width | Not separately specified | 1'–2' |
| Waterfall spillway | 22" | 16" |
| Included pump | AquaSurge® 2000-4000 | Blue Thumb 2,100 GPH Pump |
| Maximum rated pump flow | 3,947 GPH | 2,100 GPH |
| Pump control | Adjustable flow with app control | No app control listed |
| Water storage | 3 Small AquaBlox® | 1 Large Water Matrix |
| Pump access | Pondless® Waterfall Vault | Small Pump Canyon® |
| Liner | 10' × 10' reservoir 8' × 10' stream |
10' × 15' |
| Flexible pipe | 1.5" × 25' | 2" × 25' |
| Automatic dosing | Included | Not included |
| Rocks & gravel | Sold separately | Sold separately |
Aquascape Small Pondless® Kit
Currently Viewing
Blue Thumb Elite 16" Spillway Kit
Which 6-Foot Waterfall Kit Should You Choose?
Choose Aquascape when your project would benefit from a 22-inch spillway, adjustable pump flow, app-based scheduling, and an included automatic dosing system.
Consider our Blue Thumb Elite 16" Kit when you want a 16-inch spillway, a 6-foot stream, and a coordinated pond-less waterfall system built around our Pump Canyon® and Water Matrix components.
These kits use different components and reservoir configurations. The best choice depends on your intended waterfall appearance, installation space, budget, and preferred equipment.
View Blue Thumb's Elite 16" Small Spillway Falls Kit – PB16KIT
Maximum pump flow ratings are measured under manufacturer test conditions. Higher maximum GPH does not automatically mean greater installed waterfall flow. Vertical lift, plumbing resistance, and flow settings affect actual performance.
Planning and Installing Your Pondless® Waterfall
Building a professional-looking waterfall requires more than placing a pump and adding decorative stone. Site grading, excavation, reservoir construction, liner placement, plumbing, and waterfall shaping are all important.
Use these stages as a general overview. Follow the current Aquascape component instructions for exact excavation, assembly, connections, and operation.
Plan the Waterfall
Choose the location and mark the intended 6-foot stream. Plan the elevation change, stone placement, underground reservoir, and electrical access. Locate buried utilities before digging.
Excavate the Reservoir
Lay out the three AquaBlox® modules and Pondless® Waterfall Vault. Excavate and prepare the basin according to the manufacturer's assembly and depth requirements.
Install Liner and Storage
Prepare the excavation, install protective underlayment and EPDM liner, and assemble the underground storage system. Keep the pump vault accessible for future maintenance.
Install Pump and Plumbing
Position the AquaSurge® pump inside the vault. Install the check valve assembly and connect the flexible PVC pipe to the Waterfall Spillway using the specified fittings.
Build the Stone Waterfall
Arrange decorative boulders and gravel to form the stream. Position the 22-inch spillway and use waterfall foam where directed to channel water over the intended rockwork.
Fill, Test, and Configure
Fill the reservoir, verify the water level, and test waterfall circulation. Configure the Smart Control Receiver and automatic dosing equipment according to their instructions. Check for leaks and splash loss.
Installation and Electrical Safety
Connect the pump only to a properly grounded, outdoor-rated, GFCI-protected electrical outlet. Do not use an extension cord with the AquaSurge® pump.
Keep the pump fully submerged during operation. Do not allow the reservoir water level to fall below the pump's operating requirements.
Do not trim away excess liner until the system has been filled and tested. Keep liner edges high enough to help contain water within the waterfall.
Smart Pump Control and Routine Maintenance
Adjusting Your Waterfall Flow
The AquaSurge® 2000-4000 pump is supplied with a Smart Control Receiver. The receiver is an essential part of the pump system, not an optional accessory.
When configured with the Aquascape Smart Control App, you can adjust flow and create operating schedules using a compatible smartphone or tablet.
This is particularly useful when you want to vary the appearance and sound of your waterfall without manually adjusting plumbing.
Automatic Water Treatment
The included automatic dosing equipment dispenses compatible water treatment according to its settings. It is a separate system from the waterfall pump's Smart Control Receiver.
Check the treatment supply periodically and refill it with the appropriate Aquascape treatment as required.
Routine Care
- Monitor the reservoir water level and replace water lost to evaporation and splashing.
- Remove leaves and other debris from the waterfall and stream.
- Inspect and clean the pump according to its instructions.
- Check that water remains inside the intended stream and liner.
- Monitor the automatic dosing system and replenish compatible treatment.
- Inspect the reservoir, pump, and plumbing when preparing the feature for seasonal changes.
Cold-Weather Care
Freezing weather requires additional attention. Ice formation can redirect water outside the liner or reservoir, leading to water loss and possible equipment damage.
If shutting down for winter, follow Aquascape's pump and plumbing winterization instructions. Protect equipment from freezing and drain applicable plumbing.
Aquascape Manufacturer Warranty Information
This complete waterfall kit contains several components with different manufacturer warranty periods. The coverage below applies to the identified components, not automatically to the entire kit.
Warranty coverage is subject to manufacturer terms and exclusions. Proof of purchase may be required. Improper installation, misuse, electrical problems, neglect, and improper winterization may affect coverage. Other components may have separate warranty terms.
Aquascape Installation Manuals and Product Resources
Review the official instructions before installing the waterfall. The documents below provide equipment-specific installation, operation, maintenance, and warranty information.
Aquascape has updated some kit components over time. Verify the dosing equipment supplied with your kit and follow the instructions for that exact model.
Watch an Aquascape Pondless® Waterfall Installation
See how an underground reservoir, waterfall spillway, liner, and decorative stonework work together to create a Pondless® waterfall.
Aquascape's "NEW" How to Build a Pondless® Waterfall
Official AquascapePonds installation demonstration. This video covers the Pondless® waterfall system family and is not a current component-by-component demonstration of kit 53038. Equipment generations may differ. Use the current component manuals for exact connections, electrical requirements, and dosing setup. Decorative stone, plants, tools, and landscaping shown are not included unless listed above.
Need Help Choosing the Right Waterfall Kit?
Our Sales and Technical Team can help you compare the Aquascape Small Pondless® Waterfall Kit with our Blue Thumb Elite 16" Spillway Kit, review your stream layout, and understand the equipment required before installation.
Frequently Asked Questions
Does the Aquascape Small Pondless® Waterfall Kit require an existing pond?
No. This kit is designed to build a recirculating waterfall without a traditional open pond.
Water is stored underground in a lined reservoir containing AquaBlox® storage modules. The pump circulates water to the spillway, and the water returns through the stream to the concealed reservoir.
How does this Aquascape kit compare to Blue Thumb's Elite 16" Spillway Kit?
Both kits are designed for streams approximately 6 feet long.
The Aquascape kit includes a 22-inch Waterfall Spillway, an adjustable AquaSurge® pump with app connectivity, three Small AquaBlox® modules, and automatic dosing equipment.
Our Blue Thumb Elite 16" Kit uses a 16-inch spillway, a 2,100 GPH rated pump, a Pump Canyon® vault, and one Large Water Matrix.
Choose based on the finished waterfall appearance you want, available space, and preferred system features.
Can I control the waterfall pump using my smartphone?
Yes. The included AquaSurge® 2000-4000 Adjustable Flow Pump works with the Aquascape Smart Control Receiver.
When connected and configured with the Aquascape Smart Control App, you can adjust pump flow and create operating schedules.
The Smart Control Receiver is required for pump operation and is not an optional accessory. Follow the pump instructions for initial setup.
Is an automatic dosing system included in this kit?
Yes. Aquascape's current specification for kit 53038 includes a Dosing System SL with starter water treatment.
The dosing equipment dispenses compatible treatment according to its settings. It operates separately from the AquaSurge® pump's Smart Control system.
The included starter treatment will eventually need replenishment. Confirm the treatment and dosing system model supplied with your particular kit before purchasing refills.
Are decorative rocks, gravel, and waterfall lighting included?
No. Decorative stone and gravel must be supplied separately to construct the finished waterfall and conceal the reservoir.
Decorative lighting is also not included in this model. You can plan suitable waterfall lighting separately if desired.
Can I build a longer waterfall with the included materials?
This kit is designed for a waterfall or stream approximately 6 feet long. A longer or more complex installation may require different liner, reservoir capacity, plumbing, or pump sizing.
We recommend choosing equipment based on your complete waterfall layout rather than assuming the included components will accommodate an extended stream.
How much maintenance does a Pondless® waterfall require?
A Pondless® waterfall does not require maintaining a traditional fish pond, but it still needs periodic care.
You'll need to monitor water level, remove leaves and debris, inspect the pump, and maintain the included dosing equipment.
Cold-weather operation and shutdown require additional precautions.
What manufacturer's warranty comes with this Aquascape kit?
Warranty coverage varies by component.
Aquascape lists limited lifetime warranties on the Waterfall Spillway and Pondless® Waterfall Vault, a 20-year guarantee on the 45 mil EPDM liner, and a three-year limited warranty on the AquaSurge® adjustable flow pump.
The current Dosing System SL has a one-year manufacturer warranty. The exact supplied dosing-system model should be confirmed because older kit configurations may differ.
All coverage is subject to manufacturer terms, exclusions, and applicable proof-of-purchase requirements.