Reinforced for Point Loads
Blue Thumb recommends the aluminum grate for fountain arrangements that place substantial weight in concentrated areas, such as triple vase or triple basalt displays.
Reinforced support for demanding fountain layouts
Replace the standard grate surface on a 52.5-inch square Altum AquaBox® with a two-piece aluminum grate made for layouts with concentrated heavy point loads, including triple vase sets and triple basalt columns. A dedicated pump-access cover keeps the service opening usable after installation.
The ABDGRATE is a project-specific structural upgrade for the Altum reservoir—not a decorative add-on and not a complete basin.
Blue Thumb recommends the aluminum grate for fountain arrangements that place substantial weight in concentrated areas, such as triple vase or triple basalt displays.
The two grate sections are sized for the 52.5-inch square Altum AquaBox® and work with its concealed-reservoir format.
The included pump-access cover lets you plan a reachable service point for the pump and plumbing beneath the finished surface.
This listing is for the aluminum grate set only. It is intended for customers who already have—or are separately purchasing—the compatible Altum AquaBox® basin.
Use these dimensions for preliminary planning, then confirm the complete fountain and support layout before installation.
This upgrade is designed specifically for the 52-inch Altum AquaBox® Fountain Reservoir Basin (item AB52AB). The basin measures 52.5 inches square, while the grate sits in the basin's approximately 48 × 48-inch inner seat.
Do not select the grate by overall size alone. Fountain weight distribution, the position of each contact point, the center support, molded basin supports and clear pump access all affect the finished layout.
Treat the grate as part of the complete basin support system. Follow the Altum guide and confirm any grate modification directly with Blue Thumb.
Map every fountain contact point, tubing route and the pump-access location before placing the grate.
Confirm the basin is level and align the molded supports, center support and grate seam as shown in the Altum guide.
Check the plumbing path, stability and pump access before setting heavy fountain pieces or adding decorative stone.
Modification note: The published basin guide discusses drilling the standard supplied grate. It does not provide product-specific cutting or drilling instructions for ABDGRATE. Confirm the approved method and location with Blue Thumb before altering the aluminum grate.
Review the compatible basin dimensions and installation sequence before finalizing the grate, fountain and plumbing layout.
Blue Thumb's Sales and Technical Team can review the fountain footprint, total weight, contact points, support placement and service-access plan before you order.
Key details to confirm before adding this upgrade to an Altum fountain project.
No. This listing is for the two-piece aluminum grate upgrade and pump-access cover. The Altum AquaBox® basin, fountain, pump, plumbing, support components and finishing materials are separate unless included in another explicitly listed kit.
It is designed for the 52.5-inch square Altum AquaBox® fountain reservoir, item AB52AB. Blue Thumb does not list it as an upgrade for the round Achelous AquaBox® basins.
Blue Thumb recommends it for heavy concentrated loads, including triple vase sets and triple basalt columns. It does not publish a separate maximum-load rating for ABDGRATE, so have Blue Thumb review the complete basin, support and fountain layout.
Yes. One grate section has a pump-access opening, and a pump-access cover is included. Plan the layout so that cover remains reachable after the fountain and decorative material are installed.
The published Altum basin guide discusses drilling the standard supplied grate, not the ABDGRATE aluminum upgrade. Confirm approved hole locations and methods with Blue Thumb before cutting or drilling this product.
Not for every installation. Additional 17-inch Altum support columns are sold separately and may be useful for some demanding layouts. Support quantity and placement should be based on the exact fountain footprint and point-load locations.