null

Mag-Drive Fountain Pump – 1110-1980 gph (Large)

SKU:
PBLGMAGgrp
|
UPC:
80000000
$199.99 - $319.99
(No reviews yet) Write a Review
• 20 ft. cord with 3-prong plug
• Adjustable Flow
• Operates submerged only
• Ceramic Shaft Impeller
• Foam Pre-filter Included
• 5 Year Warranty
Current Stock:
Blue Thumb | Fountain Pumps

Large Mag-Drive Fountain Pumps

Dependable submersible pumping power for medium to large decorative fountains and water features. Choose from four models delivering 1,110 to 1,980 gallons per hour, with adjustable flow, a ceramic shaft impeller, and a removable foam pre-filter.

1,110–1,980 GPH 12.2–20 ft. Max Head 20 ft. Power Cord 1" Outlet 5-Year Limited Warranty

Built for Larger Water Features

Blue Thumb Large Mag-Drive Pumps provide a range of flow and lift options for decorative fountains, pond features, and recirculating water displays. Their magnetic-drive design and serviceable pre-filter help make routine ownership manageable.

Available flow ratings 1,110–1,980 GPH Four pump models
Maximum head Up to 20 ft. Varies by model
Power consumption 92–250 W Varies by model

Why Choose a Large Mag-Drive Pump?

Adjustable Water Flow

Fine-tune water movement for the appearance and operation of your decorative feature.

Magnetic-Drive Operation

A magnetically driven impeller provides reliable circulation with a straightforward, serviceable pump design.

Removable Foam Pre-Filter

Helps intercept debris before it reaches the pump inlet and can be removed for regular cleaning.

Ceramic Shaft Impeller

Durable impeller construction supports long-term operation when the pump is correctly installed and maintained.

Compare Large Mag-Drive Pump Models

All four models have a 20-foot power cord and 1-inch outlet. Compare rated flow, maximum head, and electrical requirements before choosing.

Model Flow Watts Max. Head Amps Outlet
PB2590 1,110 GPH 92 W 12.2 ft. 0.85 A 1"
PB2606 1,300 GPH 110 W 13.5 ft. 1.00 A 1"
PB2613 1,495 GPH 153 W 16.7 ft. 1.46 A 1"
PB2620 1,980 GPH 250 W 20 ft. 2.60 A 1"
Important sizing note: Maximum head is the approximate height at which pump flow reaches zero. The listed GPH ratings should not be interpreted as the flow delivered at the top of your fountain. Actual performance depends on vertical lift, tubing length, fittings, and flow restrictions. Consult the manufacturer's pump performance information when sizing.

Pump Dimensions & Fit

PB2590, PB2606 & PB2613

With 2" guard:
9.25" L × 4.5" W × 5.5" H

Without guard:
7.25" L × 4.5" W × 5.5" H

PB2620 — 1,980 GPH

With 2" guard:
10" L × 4.5" W × 6.5" H

Without guard:
8" L × 4.5" W × 6.5" H

Before ordering: Measure the available pump compartment or reservoir space, including clearance for the inlet guard, outlet connection, and servicing. Do not remove required protective components simply to fit the pump into a smaller space.

How to Choose the Right Pump

1

Determine the Desired Water Flow

Consider the size of your fountain, water outlet, and desired visual effect. A gentle display needs different flow than a broad or vigorous water feature.

2

Calculate Total Pumping Height

Measure the vertical distance from the reservoir water surface to the discharge point. Account for additional friction losses from tubing and fittings.

3

Check Plumbing Compatibility

Each large model has a 1-inch pump outlet. Confirm that your connection hardware and tubing are compatible.

4

Verify Reservoir and Power Requirements

Ensure adequate water depth, safe electrical access, sufficient reservoir space, and room for periodic maintenance.

Installation & Operation

These pumps are designed for submerged operation only. Follow the supplied manufacturer's manual and all applicable electrical safety requirements.

1

Position the Pump

Place the pump securely in the water reservoir with the intake unobstructed. Keep it away from excessive sediment.

2

Connect the Discharge Plumbing

Attach properly sized tubing and compatible fittings to the pump outlet. Avoid unnecessary bends or restrictions.

3

Fill the Reservoir

Completely submerge the pump as required by the manufacturer before applying power. Never operate the pump dry.

4

Start and Adjust

Connect to a properly protected electrical supply and adjust the flow to suit the water feature. Check for leaks, splash loss, and stable reservoir water levels.

Electrical safety: Use a properly grounded, GFCI-protected electrical connection. Disconnect power before handling, cleaning, or servicing the pump. Never lift the pump by its power cord.

Routine Maintenance

Regular cleaning helps maintain flow and reduces avoidable pump interruptions. Maintenance frequency depends on water quality, debris levels, and operating conditions.

Clean the Pre-Filter

Disconnect power, remove collected debris, and rinse the foam pre-filter and inlet guard when water flow becomes restricted.

Inspect the Impeller

Follow the manual to access the impeller. Remove debris and carefully clean mineral deposits with white vinegar and a soft brush.

Monitor Water Levels

Refill the reservoir as necessary to keep the pump properly submerged and prevent dry running.

Investigate Reduced Flow

Check the pre-filter, impeller, tubing, outlet, and water level before assuming the pump requires replacement.

What Comes with the Pump?

Your selected Large Mag-Drive Pump includes the pump assembly with a ceramic shaft impeller, removable foam pre-filter, and attached 20-foot power cord.

Sold as a pump, not a complete fountain kit. Confirm any required tubing, adapters, fountain hardware, basin, and other installation components separately.

Related Pumps & Replacement Parts

Explore compatible pump families and replacement pre-filters for ongoing maintenance.

Product Manual & Resources

Frequently Asked Questions

Can this pump operate outside the water?
No. Large Mag-Drive Pumps are designed for submerged operation only. Do not run the pump dry or install it as an external pump.
Which size Large Mag-Drive Pump do I need?
Choose based on the desired water flow at your actual pumping height, not GPH alone. The four models range from 1,110 to 1,980 GPH and have different maximum head ratings. Check your fountain's plumbing and performance requirements.
Does the pump have adjustable flow?
Yes. The Large Mag-Drive Pump family features adjustable flow, allowing you to fine-tune the water display within the pump's operating capabilities.
What size is the pump outlet?
All four large models have a 1-inch outlet. Verify the required connection fittings and tubing before installation.
How long is the power cord?
Each large model has a 20-foot power cord with a three-prong plug. Follow the manufacturer's electrical safety instructions.
How often should the pump be cleaned?
Cleaning frequency depends on debris, mineral content, and operating conditions. Inspect the pre-filter regularly and clean the impeller when buildup or reduced performance occurs.
What if the pump stops working?
Disconnect power and check for low water, a blocked intake, a jammed impeller, or overheating. Consult the troubleshooting instructions in the owner's manual. Never work on a connected pump.
Does the pump include a warranty?
Yes. Blue Thumb provides a 60-month limited warranty against defects in materials and workmanship under normal use, subject to the manufacturer's conditions. Proof of purchase is required for warranty claims.
We're Here to Help

Questions Before Ordering?

Not sure which Large Mag-Drive Pump is right for your fountain? Blue Thumb can help you compare flow requirements, pumping height, and plumbing compatibility before you buy.