null
AI53034

Aquascape Medium Pond Kit 11′ × 16′ with AquaSurge® 2000-4000 Adjustable Flow Pond Pump

SKU:
AI53034
$4,070.48
(No reviews yet) Write a Review
  • Blue Thumb’s Recommended Alternative: Blue Thumb 8′ × 11′ Elite Pond Kit
  • Contractor-grade skimmer and 14″ waterfall filter
  • 2,100 GPH solids-handling pump
  • Lifetime warranty on Blue Thumb skimmer and waterfall-filter bodies
Current Stock:
Description
 

Aquascape professional-grade pond kit

Medium Pond Kit 11′ × 16′ with AquaSurge® 2000-4000 Pump

Build a complete backyard ecosystem pond with coordinated filtration, adjustable water flow, warm-white LED lighting, automatic treatment dosing, liner, underlayment, plumbing, and installation supplies. This exact kit pairs Aquascape’s 11′ × 16′ layout with the app-enabled AquaSurge® 2000-4000 Adjustable Flow Pond Pump.

Finished pond: Up to 11′ × 16′
Maximum depth: 2′
Pump flow: Up to 3,947 GPH
Liner: 15′ × 20′, 45 mil EPDM

A coordinated system for a living water garden

Mechanical and biological filtration

The Signature Series 1000 Pond Skimmer captures surface debris and protects the pump, while the Signature Series 2500 BioFalls® Filter provides biological filtration and starts the waterfall.

Adjustable, connected water flow

The included AquaSurge® pump and Smart Pump Receiver let you adjust flow and schedules through the Aquascape Smart Control App or use the receiver’s on-board controls.

Built for day-to-night enjoyment

Two 3-watt spotlights and one low-profile 1-watt waterfall light add warm-white illumination to the pond, waterfall, and surrounding landscape.

Is this the right size for your site?

The 11′ × 16′ measurement describes the finished pond, not the total work area. Plan additional space for the 21″ × 22″ × 26.5″ Signature Series 1000 Pond Skimmer, the 24″ × 29.5″ × 20″ Signature Series 2500 BioFalls® Filter, the waterfall or stream, equipment access, excavated soil, and finished landscaping.

The included 15′ × 20′ liner is sized for a pond up to 11′ × 16′ with a maximum depth of 2′. If your design is deeper, longer, wider, or includes a substantial stream, contact us before ordering so we can help confirm the liner and plumbing plan.

What’s included

Major components are grouped below so you can see how the system fits together.

Filtration

  • Signature Series 1000 Pond Skimmer with faux rock lid, rigid debris basket, filter mat, overflow, and 8″ weir
  • Signature Series 2500 BioFalls® Filter with rock tray and BioBalls Biological Filter Media

Circulation and plumbing

  • AquaSurge® 2000-4000 Adjustable Flow Pond Pump with Smart Pump Receiver
  • Check valve assembly
  • 2″ × 25′ flexible PVC pipe

Lighting

  • Two 3-watt warm-white spotlights
  • One 1-watt warm-white waterfall light
  • 60-watt lighting transformer with photocell
  • 3-way quick-connect splitter
  • 25′ quick-connect extension cable

Pond structure and water care

  • Dosing System SL with 32 fl. oz. starter water treatment
  • 15′ × 20′, 45 mil EPDM fish-safe liner
  • 300 sq. ft. protective underlayment
  • Installation kit with silicone, Pond and Waterfall Foam Sealant, PVC cement, and additional installation supplies

Before you order

Rocks and gravel are recommended to complete the pond but are not included. Fish, aquatic plants, excavation, electrical work, and finished landscaping are also not listed as kit contents. Verify access for excavation and material delivery, and plan a code-compliant outdoor electrical supply before installation.

Want to compare another configuration? Browse our complete pond kits or review the Blue Thumb Elite Pond Kits.

Technical specifications

Specifications below apply to the AquaSurge® version sold on this page.

Blue Thumb SKU: AI53034
Aquascape kit item: 53034
Finished pond size: 11′ L × 16′ W × 2′ maximum depth
Liner: 15′ × 20′, 45 mil fish-safe EPDM
Underlayment: 300 sq. ft.
Flexible pipe: 2″ diameter × 25′ long
Pump model: AquaSurge® 2000-4000 Adjustable Flow Pond Pump
Pump item number: 45009
Maximum pump flow: 3,947 GPH
Pump electrical: 120V AC, 60 Hz, 1.82A
Pump wattage: 180–215W, depending on flow setting
Pump cord length: 20′
Pump dimensions: 14″ L × 6″ W × 7.5″ H
App connectivity: Aquascape Smart Control App; 2.4 GHz Wi-Fi required
Skimmer model: Signature Series 1000 Pond Skimmer, item 43022
Skimmer capacity: Ponds up to 1,000 sq. ft.; flow up to 10,000 GPH
Skimmer dimensions: 21″ L × 22″ W × 26.5″ H
BioFalls® model: Signature Series 2500 BioFalls® Filter, item 09020
BioFalls® capacity: Ponds up to 2,500 gal.; flow up to 5,000 GPH
BioFalls® dimensions: 24″ L × 29.5″ W × 20″ H
BioFalls® spillway: 21.5″ wide
Dosing system: Dosing System SL, item 96085
Dosing-system range: Designed for water features up to 2,250 gal.
Lighting package: Two 3W spotlights and one 1W waterfall light

Plan the installation

This is a substantial landscape project involving excavation, leveling, liner work, plumbing, filtration, stone placement, and electrical planning. Follow the official manuals for complete instructions.

Choose and mark the site

Lay out the finished pond, waterfall, skimmer, BioFalls®, plumbing route, equipment access, and electrical location before digging. Position the skimmer opposite the waterfall when practical to support circulation.

Excavate and compact

Create stable shelves and a maximum pond depth of 24″. Compact and level the skimmer and BioFalls® foundations so the operating water level and spillway elevation are correct.

Install underlayment and liner

Remove sharp debris, place the protective underlayment, and position the EPDM liner without tension. Make the skimmer and BioFalls® connections exactly as shown in their manuals.

Connect pump and plumbing

Place the AquaSurge® pump inside the skimmer, connect the check valve and 2″ flexible PVC pipe, and route water to the BioFalls®. Keep plumbing accessible until leak testing is complete.

Rock, gravel, and finish

Add separately purchased rock and gravel to stabilize and naturalize the pond. Shape the waterfall, conceal liner edges without pulling them tight, and keep service access clear.

Fill, power, and test

Fill the pond, detoxify new water as appropriate, check every connection, prime the system, and confirm flow before finishing the surrounding landscape. Set the Dosing System SL for the actual pond volume.

Electrical and operating safety

Connect the 120V pump only to a properly grounded, outdoor-rated GFCI receptacle protected from rain and snow. Do not use an extension cord. Have a qualified electrician complete required wiring and verify local-code compliance. Disconnect power before maintenance, never lift the pump by its cord, and do not operate the pump dry.

Mount the Smart Pump Receiver above ground in a cool, shaded location. The pump is designed to operate inside the included skimmer and should not be placed unfiltered directly in the pond.

Care and seasonal ownership

Routine care

  • Run the circulation pump continuously for normal ecosystem operation.
  • Empty the skimmer basket as debris accumulates and remove excess organic material from the pond.
  • Inspect and clean the pump screens when flow decreases; disconnect power first.
  • Top off for evaporation and treat replacement water appropriately before exposing fish or plants.
  • Replace the Dosing System SL treatment bottle and wear-item pump cartridge as directed.

Cold-weather planning

  • If fish remain outdoors, maintain an opening in surface ice for gas exchange and follow climate-appropriate pond care.
  • If the pump runs through winter, check operation and watch for ice that blocks water return or causes damming.
  • If you shut the system down, remove and clean the pump and store it in a frost-free location.
  • Drain and winterize plumbing, pumps, and check valves as required to protect equipment and warranty coverage.

Component-specific warranty coverage

Warranty periods differ by component; no single warranty period applies to the entire kit.

Skimmer: Limited lifetime warranty
BioFalls® filter: Limited lifetime warranty
45 mil EPDM liner: 20-year guarantee
AquaSurge® pump: 3-year limited warranty
LED light fixtures: 5-year limited warranty
Dosing System SL: 1-year warranty

Product resources

Review the owner’s manual and component instructions before installation.

Ecosystem Pond Owner’s Manual — English Ecosystem Pond Owner’s Manual — French Medium Pond Kit CAD Detail AquaSurge® Pump Instructions Signature Series 1000 Skimmer Instructions Signature Series 2500 BioFalls® Instructions Dosing System SL Instructions

See how an Aquascape ecosystem pond is built

Aquascape expert Ed Beaulieu walks through the major stages of building an ecosystem pond. This official family-level installation video is not specific to item 53034; use the exact component manuals above for model-specific connections and settings.

Video by AquascapePonds. Rocks, gravel, fish, plants, tools, equipment, and landscaping shown in the video are not included unless specifically listed above.

Planning a pond this size? Let’s confirm the details.

Our Sales/Tech Team can help you review site fit, included components, electrical planning, installation questions, and whether this is the right kit for your landscape.

Call 888-619-3474 Email the Sales/Tech Team

Frequently asked questions

Is this a complete pond kit?

It includes the major pond structure, filtration, pump, plumbing, warm-white lighting, automatic dosing, and installation supplies listed above. Rocks and gravel are recommended to complete the pond but are not included. Fish, aquatic plants, excavation, electrical work, and finished landscaping are not listed as included.

How large and deep can I build the pond?

The included liner and underlayment are specified for a finished pond up to 11′ × 16′ with a maximum depth of 2′. The total project area must be larger to accommodate the skimmer, BioFalls®, waterfall, access, and landscaping.

Can I control the pump from my phone?

Yes. The included Smart Pump Receiver connects the AquaSurge® pump to the Aquascape Smart Control App for flow adjustment and scheduling. The receiver supports 2.4 GHz Wi-Fi and also provides on-board controls.

What electrical service does the kit need?

The pump operates on 120V AC, 60 Hz and must connect to a properly grounded, outdoor-rated GFCI receptacle. The lighting uses the included low-voltage transformer. Do not use an extension cord for the pump; have a qualified electrician address required wiring and local-code requirements.

Is the liner suitable for fish and plants?

Yes. The included 45 mil EPDM liner is identified by Aquascape as fish safe. Successful fish and plant care still depends on responsible stocking, water treatment, circulation, aeration, and climate-appropriate seasonal care.

How often does the pond need maintenance?

Maintenance varies with debris load, stocking, weather, and season. Expect to empty the skimmer basket as needed, remove excess organic debris, inspect pump screens when flow changes, replace dosing treatment and wear parts, top off evaporation, and perform seasonal care.

What should I do with the pump in winter?

If you run the system through winter, check it regularly and prevent ice from blocking circulation or creating a dam. If you shut it down, remove and clean the pump, store it in a frost-free location, and properly drain and winterize plumbing and check valves. Maintain an opening in the ice for gas exchange when fish remain in the pond.

Is professional installation required?

Professional installation is not stated as mandatory, but this is a large landscape project. It is best suited to an experienced DIY installer or pond professional who can manage excavation, elevations, liner penetrations, plumbing, rock placement, and code-compliant electrical planning.