The Elite Pump Canyon protects your pump with an octagonal design that eliminates distortion and withstands the pressure of being buried under rock. Slots cut in the sides allow water to freely enter the chamber. Autofill spinweld allows you to add an autofill kit (PB1342 sold seperately) to keep maintenance to a minimum. Perfect for pond-less applications.

• Max Pump Flow: 2500 gph
• Dimensions: 12.25" x 14" x 16"
• One Piece Molded Construction
• UniSeal accepts 1.5" Flex Hose
• Lifetime Manufacturers Warranty

How it Works

After digging a basin and installing our Basin Matrix & Liner, it's simple to install the Pump & Check Valve Assembly inside a Pump Canyon®. The pump pushes water through the PVC Flex Hose up to the Cascade Box. From there, water flows back into the lined basin and continues to recirculate

Easy Installation with Our Kits

Step 1. Layout appropriate Basin Matrix and Pump Canyon configuration. Outline area with spray paint. Excavate to required size and depth.

Step 2. Install Underliner first, then Rubber Liner. Place Pump Canyon® and Matrix Boxes on top of the liner. Backfill outside the lined basin area.

Step 3. Expand liner up your incline and place Cascade Box on liner over leveled area at the top.

Step 4. Place Pump in the Pump Canyon®. Connect Plumbing from Pump to Casade Box.

Step 5. Cover Matrix and Pump Canyon® with decorative stone. Stack rocks to build the waterfall and stream. Fill with water and plug-in Pump to start.

Pond-Less Waterfall Perfect
for Trouble Areas

This landscape area had a steep slope that could not be planted and mulch would wash away during rains. The perfect solution was adding a pondless feature to this landscape.